【 General Description 】

The WT6633P is a highly integrated USB Power Delivery (PD) controller that supports USB PD 3.0 Programmable Power Supply specification and Qualcomm® Quick ChargeTM 4 or Quick Charge 4+ technologies. It is designed for USB Type-C power source applications such as power adapters, wall chargers, car chargers, power strip, power bank, and etc.

The WT6633P minimizes external components by integrating USB PD baseband PHY, Type-C detection, shunt regulator, voltage and current monitors, NMOS load switch driver and an 8-bit MCU to allow small form factor and low BOM cost. Wide operation voltage range (3V to 24V) supports PD 3.0 Programmable Power Supply (PPS) specification. One-Time-Programmable ROM is provided for program code and user configuration data.

【 Features 】

● USB Type-C and USB-PD

  - Supports USB PD 3.0 including Programmable Power Supply (PPS)

  - Programmable Type-C pull-up Rp

  - Integrated VCONN power and switch for reading E-marked cable

● Supports USB BC1.2 DCP, Quick Charge 4 and Quick Charge 4+ (backward compatible Quick Charge 3.0 and Quick Charge 2.0)

● Supports Fast Charge Protocol and Smart Charge Protocol

● Built-in shunt regulator

  - Programmable constant voltage control

  - Programmable constant current control

  - Integrated low side current sense amplifier

  - Cable drop compensation

● Programmable fault protections

  - Over Voltage Protection (OVP)

  - Under Voltage Protection (UVP)

  - Over Current Protection (OCP)

  - Over Temperature Protection (OTP)

● 10-bit ADC for voltage and current monitoring

● MCU

  - Turbo 8051 compatible MCU

  - 16K bytes One-Time-Programmable ROM

● Driver for NMOS load switch

● Built-in discharge MOS transistor

● Internal RC oscillator

● Internal VDD regulator

● General purpose I/Os

● Supports power saving mode

● Operating voltage range: 3V ~ 24V (30V tolerant)

● Operating temperature range: -20°C ~ +105°C

● Package: 16-Pin QFN, 14-pin SOP and 10-pin SOP